FATRAFOL 810/V (810)
FATRAFOL 810/V (810) is based on PVC-P and reinforced with a polyester scrim. It resists UV radiation and can be directly exposed to weathering. It is designed for mechanically fastened systems with the waterproofing freely exposed to weather, without protective or wear layers.
- Most widely used Fatrafol membrane
- High wind suction resistance
- Installation possible in any weather
Characteristics
Service life of at least 25 years
Verified by testing and by real-world construction experience.
Thermal stability
The waterproofing membrane retains its properties at temperatures from -30 to +80 °C.
Complete supply solution
Supply of membranes including auxiliary and finishing components.
All substrate types
The membrane is suitable for use on all types of roof structures and materials.
UV and weather resistance
The membrane is long-term resistant to UV radiation and common environmental influences.
Fast membrane application
Simple and fast membrane installation, easy maintenance.
Technical specifications
- Drip edge from PVC-coated
- Butyl rubber tape
- Trapezoidal sheet flute closer
- Internal corner trim from FATRANYL PVC-coated metal sheet
- Trapezoidal sheet metal
- Bellows-shape preformed corner
- Cone-shape preformed corner
- Separation layer – glass fleece
- PVC-P membrane FATRAFOL 810 (804)
- PVC-P membrane FATRAFOL 810/V (810)
- Thermal insulation – expanded polystyrene
- Thermal insulation – mineral wool
- Vapour barrier
- Fastener
Thickness | Width (mm) | Length (m) | Quantity per roll (m2) |
|---|---|---|---|
1,2 | 1025 | 25 | 26,625 |
1,2 | 1650 | 25 | 41,25 |
1,2 | 2050 | 25 | 51,25 |
1,5 | 1025 | 20 | 20,50 |
1,5 | 1650 | 20 | 33 |
1,5 | 2050 | 20 | 41 |
1,8 | 1025 | 16,5 | 16,913 |
1,8 | 1650 | 16,5 | 27,225 |
1,8 | 2050 | 16,5 | 33,825 |
2,0 | 1025 | 15 | 15,375 |
2,0 | 1650 | 15 | 24,75 |
2,0 | 2050 | 15 | 30,75 |
By agreement between the manufacturer and the customer, the membrane can also be produced in other sizes.
Thickness | Width (mm) | Length (m) | Quantity per roll (m2) |
|---|---|---|---|
1,2 | 1300 | 25 | 32,5 |
1,2 | 1500 | 25 | 37,5 |
1,2 | 2050 | 25 | 51,25 |
1,5 | 1300 | 20 | 26 |
1,5 | 1500 | 20 | 30 |
1,5 | 2050 | 20 | 41 |
1,8 | 1300 | 16,5 | 21,45 |
2,0 | 1300 | 15 | 19,5 |
2,0 | 2050 | 15 | 30,75 |
By agreement between the manufacturer and the customer, the membrane can also be produced in other sizes.
The membranes may be installed on construction sites only by specialised, suitably trained companies. The membranes are applied in accordance with the principles set out in the FATRAFOL-S construction specification.
Find your nearest dealer
Application
Installation of the FATRAFOL system on a flat roof, including preparation, membrane welding and details.
8m 45s
Demonstration of welding and securing the profile to ensure roof watertightness.
5m 23s
Installation of a roof drain into the FATRAFOL system, including substrate preparation, fitting and welding for reliable roof drainage.
5m 23s
Installation of a closed preformed corner in the FATRAFOL system involves substrate preparation, precise fitting and welding to the membrane, ensuring lasting watertightness of the roof detail.
3m 08s
Finishing the penetration in the FATRAFOL membrane for proper sealing and long-term reliability of the detail.
7m 45s
Demonstration of welding and securing the profile to ensure roof watertightness.
1m 11s
Questions
Not sure how to choose the right membrane?
Contact a Fatra representative who will help you choose.
Dealing with a specific issue with installation, membrane choice or anything else?
The Insulation Studio provides technical support, expert consultations and answers to specific questions about FATRAFOL membranes. Answered directly by Fatra experts.
